スキップしてメイン コンテンツに移動

WTGLログ 起動時 on シリアルコンソール

LS-WTGL v1
電源投入からログインプロンプトが表示されるまで。

ファームウェア は 1.10β が当ててある。
https://www.buffalo.jp/product/detail/software/ls-w2.0tgl_r1.html
不具合があったような気がするが今は問題なく起動する。

HDDは 500GB × 2本 が入れてある。
IPアドレスは DHCP で割り振られている。



buffalo_change_power_status > Read 0x5c
buffalo_change_power_status > Writing 0x3a

Marvell Serial ATA Adapter
Integrated Sata device found
  Device 0: OK
Model: Hitachi HDP725050GLA360                  Firm: GM4OA52A Ser#:       GEA530RE29H7ZE
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 476938.9 MB = 465.7 GB (976771055 x 512)
  Device 1: OK
Model: Hitachi HDP725050GLA360                  Firm: GM4OA52A Ser#:       GEA530RE294P1E
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 476940.0 MB = 465.7 GB (976773168 x 512)

Using device ide0, partition 1

Loading from block device ide device 0, partition 1: Name: hda1
  Type: U-Boot  File:/initrd.buffalo

5665448 bytes read
Using device ide1, partition 1

Loading from block device ide device 1, partition 1: Name: hdb1
  Type: U-Boot  File:/initrd.buffalo

5665448 bytes read
Booting from Device 0
hit any key to switch tftp boot.
Hit any key to stop autoboot:  0
Hit any key to stop autoboot:  0

Reset IDE:
Marvell Serial ATA Adapter
Integrated Sata device found
  Device 0: OK
Model: Hitachi HDP725050GLA360                  Firm: GM4OA52A Ser#:       GEA530RE29H7ZE
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 476938.9 MB = 465.7 GB (976771055 x 512)
  Device 1: OK
Model: Hitachi HDP725050GLA360                  Firm: GM4OA52A Ser#:       GEA530RE294P1E
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 476940.0 MB = 465.7 GB (976773168 x 512)

Using device ide0, partition 1

Loading from block device ide device 0, partition 1: Name: hda1
  Type: U-Boot  File:/uImage.buffalo

1729224 bytes read
Using device ide1, partition 1

Loading from block device ide device 1, partition 1: Name: hdb1
  Type: U-Boot  File:/initrd.buffalo

5665448 bytes read
## Booting image at 00100000 ...
   Image Name:   Linux-2.6.16.16-arm1
   Created:      2009-03-03   8:09:21 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1729160 Bytes =  1.6 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 00800000 ...
   Image Name:   initrd
   Created:      2009-03-03   8:10:11 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    5665384 Bytes =  5.4 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK

Starting kernel ...

arg:console=ttyS0,115200 mem=64m root=/dev/sda2 rw initrd=0x00800040,15M panic=5 BOOTVER=1.13
CONFIG_BUFFALO_PLATFORM CONFIG_BUFFALO_LINKSTATION_LSWTGL_R1 ---
Uncompressing Linux................................................................................................................. done, booting the kernel.
Linux version 2.6.16.16-arm1 (root@build2.dd-hot24.nas.buffalo.local) (gcc version 4.2.0 20070413 (prerelease)) #322 Tue Mar 3 17:09:13 JST 2009
CPU: ARM926EJ-Sid(wb) [41069260] revision 0 (ARMv5TEJ)
Machine: MV-88fxx81
Using UBoot passing parameters structure
Sys Clk = 250000000, Tclk = 166664740


- Warning - This LSP release was tested only with U-Boot release 1.7.3

Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT write-back cache
CPU0: I cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets
CPU0: D cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets
Built 1 zonelists
Kernel command line: console=ttyS0,115200 mem=64m root=/dev/sda2 rw initrd=0x00800040,15M panic=5 BOOTVER=1.13
PID hash table entries: 512 (order: 9, 8192 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB = 64MB total
Memory: 45840KB available (2952K code, 540K data, 108K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 15360K
NET: Registered protocol family 16
FLASH boardId = 18
Flash bankwidth 1, base ff800000, size 40000
BUFFALO LS_WTGL_R1 FLASH size 256[KB]

  Marvell Development Board (LSP Version 1.7.8_NAS)-- BUFFALO_BOARD_LS_WTGL_R1

 Detected Tclk 166664740 and SysClk 250000000
Marvell USB EHCI Host controller #0: c16f5e00
Marvell USB EHCI Host controller #1: c16f5c00
pexBarOverlapDetect: winNum 2 overlap current 0
mvPexInit:Warning :Bar 2 size is illigal
it will be disabled
please check Pex and CPU windows configuration
PCI: bus0: Fast back to back transfers enabled
PCI: bus1: Fast back to back transfers enabled
SCSI subsystem initialized
use IDMA acceleration in copy to/from user buffers. used channels 2 and 3
Done.
cesadev_init(c0011348)
Fast Floating Point Emulator V0.9 (c) Peter Teichmann.
SGI XFS with large block numbers, no debug enabled
Initializing Cryptographic API
io scheduler noop registered (default)
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 3) is a 16550A
serial8250: ttyS1 at MMIO 0x0 (irq = 4) is a 16550A
RAMDISK driver initialized: 3 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
Marvell Gigabit Ethernet Driver 'egiga':
  o Ethernet descriptors in DRAM
  o DRAM SW cache-coherency
  o Checksum offload enabled
  o Loading network interface ** egiga_init_module (0)
'eth0'
Intergrated Sata device found
scsi0 : Marvell SCSI to SATA adapter
scsi1 : Marvell SCSI to SATA adapter
** BUFFALO Disable Command Queuing Function [0 0] **
** BUFFALO Disable Command Queuing Function [0 1] **
  Vendor: Hitachi   Model: HDP725050GLA360   Rev: GM4O
  Type:   Direct-Access                      ANSI SCSI revision: 03
  Vendor: Hitachi   Model: HDP725050GLA360   Rev: GM4O
  Type:   Direct-Access                      ANSI SCSI revision: 03
Linux IAL (ERROR) : retry command host=0, bus=0 SCpnt = c36a8ba0
SCSI device sda: 976771055 512-byte hdwr sectors (500107 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
SCSI device sda: 976771055 512-byte hdwr sectors (500107 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda4 < sda5 sda6 >
sd 0:0:0:0: Attached scsi disk sda
Linux IAL (ERROR) : retry command host=1, bus=1 SCpnt = c36a8ba0
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
sdb: Write Protect is off
SCSI device sdb: drive cache: write back
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
sdb: Write Protect is off
SCSI device sdb: drive cache: write back
 sdb: sdb1 sdb2 sdb4 < sdb5 sdb6 >
sd 1:0:0:0: Attached scsi disk sdb
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
physmap flash device: 40000 at ff800000
>jedec_probe
Found: SST 39LF020
phys_mapped_flash: Found 1 x8 devices at 0x0 in 8-bit bank
number of JEDEC chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cmdlinepart partition parsing not available
RedBoot partition parsing not available
mice: PS/2 mouse device common for all mice
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
Kernel event proc (C) BUFFALO INC. V.1.00 installed.
MICON ctrl (C) BUFFALO INC. V.1.00 installed.
Buffalo CPU Inerupts Driver (C) BUFFALO INC. Ver.0.01 alpha1 installed.
mvGppValueSet: Err. An attempt to set output value to GPP 2 in input mode.
Buffalo Gpio Control Driver (C) BUFFALO INC. Ver.0.02 installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
---- in linuxrc ---
Thu Nov  1 00:02:31 JST 2007
CheckDevices
linuxrc:choose operation (timeout 4[s])
 1:RamRoot other:HddRoot  ? -HddRoot-
-- rebuild mdadm.conf for BOOT, ROOTFS --
md: md10 stopped.
mdadm: /dev/disk2_1 has wrong uuid.
mdadm: /dev/diskmd: md1 stopped.
1_1 has wrong uuid.
mdadm: no devices found for /dev/md10
md: md0 stopped.2_1 has wrong uuid.

mdadm: /dev/disk1_1 has wrong uuid.
mdadm: no devices found for /dev/md1
md: bind
md: bind
raid1: raid set md0 active with 2 out of 2 mirrors
mdadm: /dev/md0 has been started with 2 drives.
-- setup max error counts --
/sys/block/md0/md/maxerr_cnt is setted to 20
Starting :fsck_disks(boot) ...         [Success.]
Starting :fsck_disks(rootfs) ...       [Success.]
Starting :mount(boot) ...              kjournald starting.  Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
[Success.]
Starting :umount(boot) ...             [Success.]
-- rebuild mdadm.conf for BOOT, ROOTFS --
md: md10 stopped.
mdadm: cannot open device /dev/disk2_1: Device or resource busy
mdadm: /dev/disk2_1 has wrong uuid.
mdadm: cannot open device /dev/disk1_1: Device or resource busy
mdadm: /dev/disk1_1 has wrong uuid.
mdadmd: bind
m: /dev/disk2_2 md: bind
has wrong uuid.
mdadm: /dev/disk1_2 has wrong uuid.
raid1: raid set md10 active with 2 out of 2 mirrors
mdadm: /dev/md10md: md1 stopped.
 has been started with 2 drives.
md: bind
md: bind
raid1: raid set md1 active with 2 out of 2 mirrors
mdadm: /dev/md1 has been started with 2 drives.
-- setup max error counts --
/sys/block/md0/md/maxerr_cnt is setted to 20
/sys/block/md1/md/maxerr_cnt is setted to 20
/sys/block/md10/md/maxerr_cnt is setted to 20
XFS mounting filesystem md1
PRODUCTID=0x00003001 PRODUCTID=0x00003001
KERNEL:2009/3/3 17:9:8
HDD:2009/3/3 17:11:16
KERNEL:2009/3/3 17:9:50
HDD:2009/3/3 17:11:16
/dev/md1:/mnt:5%
-- CopyFromInitrdToHdd --
.........Finish

XFS mounting filesystem md1
VFS: Mounted root (xfs filesystem).
Trying to move old root to /initrd ... okay
Freeing init memory: 108K
init started:  BusyBox v1.1.1 (2009.03.03-08:05+0000) multi-call binary
Starting pid 627, console /dev/ttyS0: '/etc/init.d/rcS'
--- rcStart (hddroot) ---
Thu Nov  1 00:02:43 JST 2007
** step1 **
=== checkroot.sh ===
ln: /var/spool/cron/cron: File exists
Adding 1003896k swap on /dev/md10.  Priority:-1 extents:1 across:1003896k
=== procps.sh ===
=== devpts.sh ===
=== sethostname.sh ===
configure files from Buffalo parameters.
=== restore_config.sh ===
kjournald starting.  Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/sbin/hotplug [block]
Update configuration files
Restore previous configuration files
/bin/tar: etc/atalk/papd.conf: time stamp 2009-02-24 22:15:01 is 41638331.926318 s in the future
/bin/tar: etc/atalk/AppleVolumes.system: time stamp 2009-02-24 22:15:01 is 41638331.91879 s in the future
/bin/tar: etc/atalk: time stamp 2009-03-03 17:11:55 is 42224945.917609 s in the future
/bin/tar: etc/cron/crontabs/root: time stamp 2019-08-20 10:16:31 is 372420821.917097 s in the future
/bin/tar: etc/melco/ls_list: time stamp 2019-08-20 12:20:25 is 372428255.916417 s in the future
/bin/tar: etc/melco/pdcuserinfo: time stamp 2009-02-24 22:14:51 is 41638321.915902 s in the future
/bin/tar: etc/melco/raidscan: time stamp 2019-08-20 11:36:47 is 372425637.915319 s in the future
/bin/tar: etc/melco/lcd_status: time stamp 2009-02-24 22:14:51 is 41638321.914621 s in the future
/bin/tar: etc/melco/timer_status: time stamp 2019-08-20 14:31:08 is 372436098.914026 s in the future
/bin/tar: etc/melco/caution: time stamp 2009-02-24 22:14:51 is 41638321.913416 s in the future
/bin/tar: etc/melco/autoadduserinfo: time stamp 2009-02-24 22:14:51 is 41638321.912923 s in the future
/bin/tar: etc/melco/DirectCopy: time stamp 2009-02-24 22:14:51 is 41638321.912327 s in the future
/bin/tar: etc/melco/pdcgroupinfo: time stamp 2009-02-24 22:14:51 is 41638321.911819 s in the future
/bin/tar: etc/melco/seach_list: time stamp 2009-02-24 22:14:51 is 41638321.911336 s in the future
/bin/tar: etc/melco/shareinfo: time stamp 2019-08-20 11:37:08 is 372425658.910826 s in the future
/bin/tar: etc/melco/userinfo: time stamp 2019-08-20 14:31:25 is 372436115.910218 s in the future
/bin/tar: etc/melco/groupinfo: time stamp 2009-02-24 22:14:51 is 41638321.909628 s in the future
/bin/tar: etc/melco/email: time stamp 2019-08-20 14:31:14 is 372436104.909022 s in the future
/bin/tar: etc/melco/crontabs: time stamp 2009-03-03 17:11:55 is 42224945.908535 s in the future
/bin/tar: etc/melco/offlinefile: time stamp 2009-02-24 22:14:51 is 41638321.908035 s in the future
/bin/tar: etc/melco/ups: time stamp 2009-02-24 22:14:51 is 41638321.904053 s in the future
/bin/tar: etc/melco/lcdled: time stamp 2009-02-24 22:14:51 is 41638321.903418 s in the future
/bin/tar: etc/melco/usbshareinfo: time stamp 2009-02-24 22:14:51 is 41638321.902805 s in the future
/bin/tar: etc/melco/msdfs: time stamp 2009-02-24 22:14:51 is 41638321.902192 s in the future
/bin/tar: etc/melco/info: time stamp 2019-08-20 14:31:25 is 372436115.901606 s in the future
/bin/tar: etc/melco/shareinfo.hidden: time stamp 2019-08-20 10:18:04 is 372420914.901171 s in the future
/bin/tar: etc/melco/shareinfo.vfs: time stamp 2019-08-20 10:18:04 is 372420914.900682 s in the future
/bin/tar: etc/melco/ntp_result: time stamp 2019-08-20 10:16:30 is 372420820.900183 s in the future
/bin/tar: etc/melco/diskinfo.bak: time stamp 2019-08-20 11:37:08 is 372425658.899626 s in the future
/bin/tar: etc/melco/backup_dstlist: time stamp 2019-08-20 12:20:26 is 372428256.899108 s in the future
/bin/tar: etc/pam.d/sudo: time stamp 2009-03-03 17:11:55 is 42224945.8844 s in the future
/bin/tar: etc/pam.d: time stamp 2009-03-03 17:11:55 is 42224945.881803 s in the future
/bin/tar: etc/proftpd: time stamp 2009-03-03 17:11:55 is 42224945.880983 s in the future
/bin/tar: etc/samba/smbpasswd.tdb: time stamp 2007-11-01 00:12:42 is 592.880165 s in the future
/bin/tar: etc/samba/lock/group_mapping.tdb: time stamp 2007-11-01 00:12:45 is 595.874436 s in the future
/bin/tar: etc/samba/lock/account_policy.tdb: time stamp 2007-11-01 00:12:45 is 595.873733 s in the future
/bin/tar: etc/samba/lock/share_info.tdb: time stamp 2007-11-01 00:12:45 is 595.873035 s in the future
/bin/tar: etc/samba/lock/gencache.tdb: time stamp 2007-11-01 00:12:45 is 595.865941 s in the future
/bin/tar: etc/samba/lock/registry.tdb: time stamp 2007-11-01 00:12:46 is 596.864962 s in the future
/bin/tar: etc/samba/lock/perfmon: time stamp 2007-11-01 00:12:46 is 596.864501 s in the future
/bin/tar: etc/samba/lock/printing/lp.tdb: time stamp 2007-11-01 00:12:46 is 596.863342 s in the future
/bin/tar: etc/samba/lock/printing: time stamp 2007-11-01 00:12:46 is 596.86299 s in the future
/bin/tar: etc/samba/lock/ntdrivers.tdb: time stamp 2007-11-01 00:12:46 is 596.862372 s in the future
/bin/tar: etc/samba/lock/ntprinters.tdb: time stamp 2007-11-01 00:12:46 is 596.861675 s in the future
/bin/tar: etc/samba/lock/ntforms.tdb: time stamp 2007-11-01 00:12:46 is 596.861183 s in the future
/bin/tar: etc/samba: time stamp 2007-11-01 00:12:45 is 595.860773 s in the future
/bin/tar: etc/ftpusers: time stamp 2009-02-24 22:14:52 is 41638322.860304 s in the future
/bin/tar: etc/group: time stamp 2009-02-24 22:14:52 is 41638322.859733 s in the future
/bin/tar: etc/gshadow: time stamp 2009-02-24 22:14:52 is 41638322.85915 s in the future
/bin/tar: etc/passwd: time stamp 2009-02-24 22:14:52 is 41638322.856893 s in the future
/bin/tar: etc/shadow: time stamp 2007-11-01 00:19:21 is 991.856257 s in the future
/bin/tar: etc/shadow-: time stamp 2009-02-24 22:14:52 is 41638322.524657 s in the future
/bin/tar: modules/webaxs/etc/webaxs.conf: time stamp 2008-07-29 19:44:25 is 23485295.523983 s in the future
/bin/tar: modules/webaxs/etc: time stamp 2009-02-19 21:43:27 is 41204437.523492 s in the future
delete unnecessary samba lock files on /tmp/upconfig//etc/samba/lock...
tar: var/log/apache/access_log: time stamp 2019-08-20 14:31:25 is 372436115.447595 s in the future
tar: var/log/apache: time stamp 2007-11-01 00:12:39 is 589.436846 s in the future
tar: var/log/backup.log.4.gz: time stamp 2019-08-20 10:20:02 is 372421032.433074 s in the future
tar: var/log/file.smb: time stamp 2007-11-01 00:12:26 is 576.431695 s in the future
tar: var/log/backup.log.3.gz: time stamp 2007-11-01 00:05:01 is 131.428061 s in the future
tar: var/log/backup.log.2.gz: time stamp 2019-08-24 16:25:01 is 372788531.426157 s in the future
tar: var/log/backup.log.1.gz: time stamp 2007-11-01 02:10:02 is 7632.422463 s in the future
tar: var/log/cron.4.gz: time stamp 2019-08-24 16:25:01 is 372788531.42023 s in the future
tar: var/log/cron.3.gz: time stamp 2007-11-01 02:10:02 is 7632.418464 s in the future
tar: var/log/cron.2.gz: time stamp 2019-08-25 00:35:01 is 372817931.416561 s in the future
tar: var/log/cron.1.gz: time stamp 2007-11-01 00:05:01 is 131.399001 s in the future
tar: var/log/wtmp.4.gz: time stamp 2019-08-24 16:25:01 is 372788531.397216 s in the future
tar: var/log/wtmp.3.gz: time stamp 2007-11-01 02:10:02 is 7632.395163 s in the future
tar: var/log/wtmp.2.gz: time stamp 2019-08-25 00:35:01 is 372817931.393293 s in the future
tar: var/log/wtmp.1.gz: time stamp 2007-11-01 00:05:01 is 131.389103 s in the future
tar: var/log/messages.6.gz: time stamp 2019-08-20 10:20:03 is 372421033.386844 s in the future
tar: var/log/messages.5.gz: time stamp 2007-11-01 00:05:01 is 131.38477 s in the future
tar: var/log/messages.4.gz: time stamp 2019-08-24 16:25:01 is 372788531.382887 s in the future
tar: var/log/messages.3.gz: time stamp 2007-11-01 02:10:02 is 7632.380025 s in the future
tar: var/log/messages.2.gz: time stamp 2019-08-25 00:35:01 is 372817931.378228 s in the future
tar: var/log/linkstation.log.6.gz: time stamp 2019-08-20 10:20:03 is 372421033.374335 s in the future
tar: var/log/linkstation.log.4.gz: time stamp 2019-08-24 16:25:01 is 372788531.370121 s in the future
tar: var/log/linkstation.log.2.gz: time stamp 2019-08-25 01:35:01 is 372821531.368223 s in the future
tar: var/log/linkstation.log.1.gz: time stamp 2007-11-01 00:05:01 is 131.366391 s in the future
tar: var/log/raidsync: time stamp 2019-08-20 14:20:56 is 372435486.364228 s in the future
tar: var/log/messages.1.gz: time stamp 2007-11-01 00:05:01 is 131.359777 s in the future
tar: var/log/linkstation.log.5.gz: time stamp 2007-11-01 00:05:01 is 131.357936 s in the future
tar: var/log/linkstation.log.3.gz: time stamp 2007-11-01 02:10:02 is 7632.356012 s in the future
tar: var/log: time stamp 2007-11-01 00:05:01 is 131.353911 s in the future
=== free_ramdisk.sh ===
/sbin/hotplug [block]
Successfully unmounted /dev/ram0
Successfully unmounted /dev/ram0
** step2 **
=== EnablingAutoip.sh ===
=== usb.sh ===
/sbin/hotplug [module]
/sbin/hotplug [drivers]
usbcore: registered new driver usbfs
/sbin/hotplug [drivers]
usbcore: registered new driver hub
/sbin/hotplug [drivers]
/sbin/hotplug [module]
/sbin/hotplug [drivers]
ehci_platform ehci_platform.4523: EHCI Platform Host Controller
/sbin/hotplug [usb_host]
ehci_platform ehci_platform.4523: new USB bus registered, assigned bus number 1
ehci_platform ehci_platform.4523: irq 17, io mem 0x00000000
ehci_platform ehci_platform.4523: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
/sbin/hotplug [usb]
usb usb1: configuration #1 chosen from 1 choice
/sbin/hotplug [usb]
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
/sbin/hotplug [usb_device]
[/etc/hotplug.d/usb_device/buffalo.hotplug] usb_device
ehci_platform ehci_platform.16781: EHCI Platform Host Controller
/sbin/hotplug [usb_host]
ehci_platform ehci_platform.16781: new USB bus registered, assigned bus number 2
ehci_platform ehci_platform.16781: irq 12, io mem 0x00000000
ehci_platform ehci_platform.16781: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
/sbin/hotplug [usb]
usb usb2: configuration #1 chosen from 1 choice
/sbin/hotplug [usb]
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
/sbin/hotplug [usb_device]
[/etc/hotplug.d/usb_device/buffalo.hotplug] usb_device
/sbin/hotplug [drivers]
/sbin/hotplug [module]
Initializing USB Mass Storage driver...
/sbin/hotplug [drivers]
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
/sbin/hotplug [module]
/sbin/hotplug [drivers]
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
=== hotplug.sh ===
/etc/hotplug.d/scsi_device/usb-buffalo.hotplug: line 292: /var/tmp/not_found_guid.list: No such file or directory
=== networking.sh ===
create network files..
IP=[dhcp], netmask=[], dgw=[], dns1=[], dns2=[]
killall: dhcpcd: no process killed
route: SIOC[ADD|DEL]RT: No such process
Configuration network interface: lo eth0
requesting DHCP  tout=30[s]
networking.sh: dhcp requesting...
DontDownIfaceeth0: link down

alwaysFork
eth0: link up<5>, full duplex<5>, speed 100 Mbps<5>
sendto:  count 6   sync 0
sendto:  count 6   sync 0
dhcpcd.exe: interface eth0 has been configured with old IP=192.168.0.14 GATEWAY=192.168.0.1
** networking.sh dhcp fin.
configure files from Buffalo parameters.
=== syslog.sh ===
Starting system logger: optarg:syslog
LoadConfFileString:key=[local_auth] not found in /etc/melco/info.
load_info ItemValue = off
LoadConfFileString:key=[ad_dns] not found in /etc/melco/info.
LoadConfFileOnOff:key=[info_visible] not found in /etc/melco/info.
LoadConfFileString:key=[array2] not found in /etc/melco/diskinfo.
LoadConfFileString:key=[usb_disk2] not found in /etc/melco/diskinfo.

Starting kernel logger:
=== inetd.sh ===
Starting inetd:=== kernelmon.sh ===
Starting kernelmon:=== miconmon.sh ===
=== checkSysMd.sh ===
/dev/md0
KERNELMOn (lanact 0 half)
     Raid Level : raid1
KERNELMOn (lanact 100 full)
/dev/md1
     Raid Level : raid1
/dev/md10
     Raid Level : raid1
=== start_data_array.sh ===
-- start data arrays --
-- rebuild mdadm.conf for md2,md3--
/sbin/hotplug [block]
/sbin/hotplug [block]
/sbin/hotplug [block]
/sbin/hotplug [block]
/sbin/hotplug [block]
/sbin/hotplug [block]
/sbin/hotplug [block]
/sbin/hotplug [block]
mdadm: no RAID superblock on /dev/md2
mdadm: /dev/md2 has wrong uuid.
mdadm: no RAID superblock on /dev/md3
mdadm: /dev/md3 has wrong uuid.
mdadm: /dev/md2 has been started with 2 drives.
-- setup max error counts --
/sys/block/md2/md/maxerr_cnt is setted to 20
/sys/block/md3/md/maxerr_cnt is setted to 20
/sys/block/md4/md/maxerr_cnt is setted to 20
-- check /etc/melco/diskinfo and real RAID disks. --
ARRAY1 RAID1 good
-- Mount local disks --
XFS mounting filesystem md2
/sbin/hotplug [block]
=== check_shareinfo.sh ===
** spool array1
find: /mnt/array2: No such file or directory
find: /mnt/disk3: No such file or directory
find: /mnt/disk4: No such file or directory
** step3 **
=== diskmon.sh ===
=== drivecheck.sh ===
=== ftpd.sh ===
ftp is OFF
=== atalk.sh ===
atalk is OFF
=== httpd.sh ===
start
Starting HTTPD services: /usr/local/apache/bin/apachectl start: httpd started

=== smb.sh ===
configure samba
optarg:samba
LoadConfFileString:key=[local_auth] not found in /etc/melco/info.
load_info ItemValue = off
LoadConfFileString:key=[ad_dns] not found in /etc/melco/info.
LoadConfFileOnOff:key=[info_visible] not found in /etc/melco/info.
LoadConfFileString:key=[array2] not found in /etc/melco/diskinfo.
LoadConfFileString:key=[usb_disk2] not found in /etc/melco/diskinfo.
LoadConfFileString:key=[msdfs_link1_unc1] not found in /etc/melco/msdfs.
LoadConfFileString:key=[msdfs_link2_unc1] not found in /etc/melco/msdfs.
LoadConfFileString:key=[msdfs_link3_unc1] not found in /etc/melco/msdfs.
LoadConfFileString:key=[msdfs_link4_unc1] not found in /etc/melco/msdfs.
LoadConfFileString:key=[msdfs_link5_unc1] not found in /etc/melco/msdfs.
LoadConfFileString:key=[msdfs_link6_unc1] not found in /etc/melco/msdfs.
LoadConfFileString:key=[msdfs_link7_unc1] not found in /etc/melco/msdfs.
LoadConfFileString:key=[msdfs_link8_unc1] not found in /etc/melco/msdfs.
LoadConfFileString:key=[msdfs_link9_name] not found in /etc/melco/msdfs.
file:/etc/samba/smb.conf
>IconvCodeCharset CodePage=0,charset=CP932
buf=array1=raid1

GetSpoolDirectory> returning devicename [/mnt/array1]
file:/etc/pam_smb.conf
Setting up msdfs symbolic links... [Failed ]
Starting SMB services:
Starting NMB services:
=== clientUtil_servd.sh ===
Starting clientUtil_server:starting on eth0
=== bonjour.sh ===
Starting Bonjour services: done
=== lsprcvd.sh ===
Starting lsprcvd:=== daemonwatch.sh ===
Starting daemonwatch:daemonwatch Ver.1.01
watch list file : /etc/daemonwatch.list
=== cron.sh ===
Start services: crondlogrotate state -- version 2
=== checkconfig.sh ===
=== ups.sh ===
err:
err:
=== pwrmgr.sh ===
Starting pwrmgr:
Shutting down pwrmgr:

Starting pwrmgr:
** step4 **
=== modules.sh ===

Starting module subsystem ...
Starting module webaxs ...             [Success.]
=== itunes.sh ===
/etc/init.d/rcS: line 48: /etc/init.d/itunes.sh: No such file or directory
=== lprng.sh ===
clearing printer queue
Printer 'lp@localhost' - cannot open connection - No such file or directory
Make sure the remote host supports the LPD protocol
Printer 'lp-ps@localhost' - cannot open connection - No such file or directory
Make sure the remote host supports the LPD protocol
/mnt/array1/spool/samba created
/mnt/array1/spool/lp created
Start services: lpd
=== ltbootd.sh ===
/etc/init.d/rcS: line 48: /etc/init.d/ltbootd.sh: No such file or directory
=== pmcd.sh ===
=== twonky.sh ===
/etc/init.d/rcS: line 48: /etc/init.d/twonky.sh: No such file or directory
=== bootcomplete.sh ===
** step final(after bootcomplete) **
=== hdd_late_check.sh ===
No need to check hdd(hdd is fine).
=== check_initialization.sh ===
bootarg "func" is disabled.
=== usb_late_check.sh ===
cat: /var/run/share_delete.pid: No such file or directory
/usr/local/bin/share_delete.sh: line 6: kill: `': not a pid or valid job spec
Starting pid 1614, console /dev/ttyS0: '/sbin/getty'

BUFFALO INC. LinkStation series
LS-WTGL405 login:

ラベル:

コメント

コメントを投稿

このブログの人気の投稿

Ubuntu で RAIDディスクをマウントする

謎のHDDが見つかった。 データを確認するためWindowsにつなぐもマウントされず。 これは extとかffsの辺りかなと思い、Linux(Ubuntu)に繋ぐ。 しかし、自動マウントされない。 取り敢えずマウントする。 # mount /dev/sdb1 /mnt/disk すると'linux_raid_member'とエラー表示された。 ということで、まずファイルシステムを確認。 # parted -l このコマンドでファイルシステムが表示される。 また、Gparted でも表示される。 そこでRAIDディスクを扱うためにmdadmパッケージをインストール。 # apt install mdadm ネットでは mountコマンドの -t オプションで明示的にファイルシステムを指定するとマウントできると書いてあったのでそれを試すとマウントできた。 # mount -t ext3 /dev/sdb1 /mnt/disk 内容を確認すると不要なデータだったのでデータを削除する。 # shred -v /deb/sdb この処理はとても時間がかかるので普段使わないコンピュータで処理をした。
コメントを投稿
続きを読む

自動ログイン on Lubuntu

Lubuntu 19.04 の 自動ログインを設定してみた。 グラフィカルログインを自動で行うようにしたいが、 ユーザー設定 の中に自動ログインの設定がない。 そこでコマンドラインから設定してみた。 まず、ログインをするときに使用しているディスプレイマネージャを確認する。 $ cat /etc/X11/default-display-manager /usr/bin/sddm sddm を使っているので、sddm の自動ログインを設定する。 OSは systemd で動いていると設定ファイルがないようなので作成する。 # sddm --example-config > /etc/sddm.conf.d/sddm.conf この設定ファイルに Autologin について書いてあるのでここにユーザ名を入力。 $ head /etc/sddm.conf.d/sddm.conf [Autologin] # Whether sddm should automatically log back into sessions when they exit Relogin=false # Name of session file for autologin session (if empty try last logged in) Session= # Username for autologin session User= ここの User= にユーザ名を書き込み保存後、再起動すると自動でログインされる。
コメントを投稿
続きを読む

TVに繋いでいた録画用HDDが認識しなくなった

ポロポロとものが壊れていく。 年数もそれなりに経っているので仕方がないと思うが、 　Panasonic VIERA TH-L32X3 　メーカーページ http://panasonic.jp/viera/p-db/TH-L32X3.html 上記VIERAに繋いでいた録画用のHDDが急に認識しなくなった。 実はこれで二回目のトラブルである。 一回目は買って1年ほどでこの症状が出た。 この時はHDDが物理的な障害で故障したと思い、ダメ元で再接続再フォーマットした。 このHDDはそのあと5年以上正常に動作していた。 結局この時の障害は論理障害だったのだと思う。 今回も同様の症状だったので、復旧を試みることにした。 こちらのサイトに Panasonic製のセットトップボックスへ繋いでいたHDDの修復について書いてあった。 Panasonic CATV STBの外付けHDDのファイルシステム修復　おぼえ書き http://qiita.com/a_saitoh/items/93a9983b988b541d2cb1 これを参考にして、FreeBSD11.0( https://www.freebsd.org/ja/ ) に外付けHDDを繋いで、fsck_ffs -n を実行するも復旧せず。 仕方がないので、fsck_ffs -y や fsck_ufs -n 、 fsck_ufs -y などをかけてからTVにつなぐと認識した。 録画データは諦めていたので、いろんなコマンドをかけてしまったので、 どのコマンドが良かったかはっきりとしないが、 無事にデータが参照できるようになった。
2 件のコメント
続きを読む